BELL- GONG ON FLYWHELL
This is creativity project.
This device has
Fabrication of Wodden Base Mount.
1.I have used a surplus board wood in the shape of a triangle.
2The board wood may be of any desired shape.
3.A 10 MM hole has been drilled at the center of the board.
4. Install a 6 inch nut bolt assembly at the center of the board as shown.
5. Now the wooden base mount is ready.
Installation of Flywheel
1.This is the picture of a heavy steel Fly-Wheel of a discarded defective car clutch assembly.
2.The Flywheel is mounted on the Ball-Bearing.This facilitates smooth friction less rotation on its axis.
3.
Brass Bell Gong and Wood Piece ( a Part of Rolling Pin)
This is a brass Bell Gong. This Gong produces a resonant tone, when the gong rim is gently tapped with a piece of wood and the wood rotated rubbing along the gong circumstance .
Aluminium Door Handle With Fork and Nail an Spring Assembly.
This assembly holds the hinged wooden piece on the aluminum door handle. As shown in pictures.
The video explains how to assemble the system and how it works