BAS-39v3.5

I made a true bolt action gun. I have been talking about this gun a little bit. Fell free to mod it and do whatever you want. The only person that knew about this was Dsman192576 (sorry if I messed up the numebers.) So here it is.

Magazine, Chamber, and Barrel

First Step:
Pics 1-4: Make this
5:Make This
6:connect
7:Make these
8:Connect
9:Make
10:Connect

Body

Okay here it is.
1:Make
2:Make
3:Add the yellow connector
4-6:Make
7-9:Make handle
10:Connect
11:Connect
12:Connect
13-14:Add Barrel.
15:Make
16:Add
17:Make
18:Add
19:Make
20:Add
21:Add this
22:Add
23:Make this and attach put it into the grey connectors at the top of the mag.

Extended Barrel and Bipod

Here is the barrel and bipod. Thhe bipod is Killerk's bipod with mods.
1:Make
2:Make
3:Make
4:Connect
5:Make
6:Connect
7:Make
8:Make
9:Connect
10:Make 2
11:Make 2
12:Connect
13:Make
14:Connect
15:Make
16:Connect
17:Connect
18:Done

Stock

This is I Like It's stock with a couple of mods.
1:Make
2:Connect
3:Make
4:Connect
5:Make
6:Different View
7:Make
8:Connect
9:Connect
10:Add
11:Add

Scope

Here is my scope.
1:Make
2:Add
3:Make
4:Connect

Connect

Almost done
1:Stock and Body
2:Connect
3:Scope and Body
4:Connect
5:Extended Barrel and Body
6:Connect
7:Bipod
8:Trigger Rubber Band
9:Firing Pin and Bolt
10:Add Firing Pin and Bolt
11:Add Firing Pin and Bolt
12:Trigger
13:Add Trigger
14:Done!!!

Loading and Firing

Last Step.
1:Take off scope
2:Insert rods into mag
3:Pull back Firing Pin
4:Push forward bolt
5:Bullet In Barrel
6:Bullet shot