The simple ballon lamp is made from the ballons and the 12v led strip with the led driver

After watching the video follow the steps as

TO MAKE THE BALLON YOU NEED THE FOLLOWING THINGS

1.BALLON

2.GLUE

3.THREAD

4.12V LED STRIP

5.12V LED STRIP CONTROLLER

6.STICKING TAPE

7.POWER SUPPLY 12V

.

In the first make the glue ready for making the ballon lamp

take the glue in a empty box and mix it with 1/3 part of water and them shake well and make sure the glue is mixed well in the water

the if you want you can add some colour in the solution and make it colourfull

after that is done you need to follow the instructions for winding the thread on the ballon as i have showen in the following video

let it dry for some 12-15 hours then by using a sharp pin pinch in the ballon and after the ballon blsast you are with an awsome looking mold of the ballon

now its time to add the glow to the ballon skeleton

i thought of adding a 12v led strip insted of the regular bulb because the regular bulb gets heated very soon and consume a lot of power.

there is nothing much to explain about the 12v strip and the driver connection because nowadays the come in a direct pair as in the diagram

12v led strip driver

+12v pin----------------------+12v of driver

RED---------------------------RED

BLUE--------------------------BLUE

GREEN-----------------------GREEN

THANKS FOR WATCHING THE PROJECT

YOU CAN VISIT MY YOUTUBE CHANNEL

https://www.youtube.com/channel/UCZE35bOktFxu8dIad...

I POST THE VIDEOS EVERY WEEK ABOUT THE ARDUINO,BLUETOOTH MODULE,WIFI MODULE ,INFRA RED

AND MANY MORE

THANKS FOR THE SUPPORT

https://www.youtube.com/channel/UCZE35bOktFxu8dIadxuQPLg