BALLON LAMP!!!AMAZING!!! (simple Awsome Ballon Lamp)!!

The simple ballon lamp is made from the ballons and the 12v led strip with the led driver

After watching the video follow the steps as

TO MAKE THE BALLON YOU NEED THE FOLLOWING THINGS
1.BALLON

2.GLUE

3.THREAD

4.12V LED STRIP

5.12V LED STRIP CONTROLLER

6.STICKING TAPE

7.POWER SUPPLY 12V

In the first make the glue ready for making the balloon lamp
take the glue in a empty box and mix it with 1/3 part of water and them shake well and make sure the glue is mixed well in the water the if you want you can add some color in the solution and make it colorful after that is done

you need to follow the instructions for winding the thread on the balloons as i have shown in the following video let it dry for some 12-15 hours then by using a sharp pin pinch in the balloon and after the balloon blast you are with an awesome looking mold of the balloon

now its time to add the glow to the ballon skeleton
i thought of adding a 12v led strip insted of the regular bulb because the regular bulb gets heated very soon and consume a lot of power. there is nothing much to explain about the 12v strip and the driver connection because nowadays the come in a direct pair as in the diagram 12v led strip driver

+12v pin----------------------+12v of driver

RED---------------------------RED

BLUE--------------------------BLUE

GREEN-----------------------GREEN

Now you are ready with your balloon lamp just hang it around your room or your garden and let the public see what you have created

don't forget to share your ideas which you have created

THANKS FOR WATCHING THE PROJECT
YOU CAN VISIT MY YOUTUBE CHANNEL

https://www.youtube.com/channel/UCZE35bOktFxu8dIad...

I POST THE VIDEOS EVERY WEEK ABOUT THE ARDUINO,BLUETOOTH MODULE,WIFI MODULE ,INFRA RED AND MANY MORE THANKS FOR THE SUPPORT