BAG NAME TAG
![j1.png](/proxy/?url=https://content.instructables.com/F8O/XJH1/JF8IUBQI/F8OXJH1JF8IUBQI.png&filename=j1.png)
I developed the new design for the bag name tag.
this is my first step drawing basic design in creo design
![2.png](/proxy/?url=https://content.instructables.com/FK6/LQVN/JF8IUBRK/FK6LQVNJF8IUBRK.png&filename=2.png)
I have taken a sample dimension. I used creo software to develop this.
Card
![FGD.png](/proxy/?url=https://content.instructables.com/FPR/YILY/JF8IUBRN/FPRYILYJF8IUBRN.png&filename=FGD.png)
![Untitled.png](/proxy/?url=https://content.instructables.com/F7W/ST1G/JF8IUBRY/F7WST1GJF8IUBRY.png&filename=Untitled.png)
![HYRTUJH.png](/proxy/?url=https://content.instructables.com/FC5/92KV/JF8IUBRP/FC592KVJF8IUBRP.png&filename=HYRTUJH.png)
![796.png](/proxy/?url=https://content.instructables.com/FRC/RAU5/JF8IUBRM/FRCRAU5JF8IUBRM.png&filename=796.png)
![Untitled.png](/proxy/?url=https://content.instructables.com/FLK/5L12/JF8IUBQF/FLK5L12JF8IUBQF.png&filename=Untitled.png)
this is final assembly part.
NOTE:
actually, it is the 3d print part.now I did 3d model, then I have to send
my 3d print model to the 3d print person with extension file like the .stl file.by use, this format that 3d printer person can do print and I suggest the ABS material.