Awesome Nerf Mod: Connect Your Nerf Guns
by sub893 in Outside > Launchers
60143 Views, 20 Favorites, 0 Comments
Awesome Nerf Mod: Connect Your Nerf Guns
![IMG_0388[1].JPG](/proxy/?url=https://content.instructables.com/FO4/W5YG/GPLJ0UEE/FO4W5YGGPLJ0UEE.jpg&filename=IMG_0388[1].JPG)
I got to borrow a camera for this instructable:D borrowed being the key word:( This Nerf mod will show you how to connect your Nerf guns. It is very simple and easy to make. It also is not permanent so you can change it whenever.
Materials
![IMG_0389[1].JPG](/proxy/?url=https://content.instructables.com/F2J/9QL7/GPLJ0UF0/F2J9QL7GPLJ0UF0.jpg&filename=IMG_0389[1].JPG)
You need:
-Both Nerf Recon attachments (laser and flip up sight)
-Hot glue gun
-Screwdriver(s)
-Both Nerf Recon attachments (laser and flip up sight)
-Hot glue gun
-Screwdriver(s)
Take It Apart
![IMG_0390[1].JPG](/proxy/?url=https://content.instructables.com/F9B/C34D/GPLJ0UFA/F9BC34DGPLJ0UFA.jpg&filename=IMG_0390[1].JPG)
Unscrew the laser. Take out the part that connects to the rail. Unscrew the yellow piece. Take off the sight like in the picture.
Glueing
![IMG_0390[1].JPG](/proxy/?url=https://content.instructables.com/FZ9/UTHP/GP7IG0ZB/FZ9UTHPGP7IG0ZB.jpg&filename=IMG_0390[1].JPG)
Hot glue the black piece to the base of the sight. Make sure you are careful and let it heat up first.
Finish
![IMG_0392[1].JPG](/proxy/?url=https://content.instructables.com/FEN/TSEN/GP7IG0ZE/FENTSENGP7IG0ZE.jpg&filename=IMG_0392[1].JPG)
After it dries, put it on the gun. I attached my Maverick to my Recon, but I am not sure how much weight it can hold. Also, look at the yellow part of the above picture.