Awesome Laptop Stand
While i am having a bath I love to watch movies or series. However it (is) was a disaster because i always had to get some books or something below my laptop to see the whole screen. Therefore i made this Laptop stand. I made the cuttings with my cnc. But you are also able to built it with a scroll saw or jig saw or something like that...
Materials You Need
You need
- 1m threated rod 10mm diameter
- 1m aluminium pipe ( inside diameter is 8mm)
- a few nuts and washers , depending on the size of rod you use
-18 mm thick plywood or what you have lying around
Cut Out the Pieces and Painting
First you need to do is to cut out the two pieces. If you have no cnc you can also do it with a device you have.
After that you have to paint it with a colour you like
Assembling
When the clue is dry you can assemble it.
Iappreciate every comment about the stand. If you have any questions feel free to ask.