Automatic Watering System With ESP32

Hello everyone, today I will show you how to make your own automatic watering system witth esp32 using the blynk app. You can water your plants even when you are away. Let's get started

• ESP 32
• Mini water bucket
• Jumper Wires
• Aquarium Hose
• 5 Watt Power Supply
• 5 Watt Relay
• Wires( for Fixing the hose to the plant)
• 5 Watt Water Pump

Test your components using the voltmeter and make sure that everything works fine

First, make sure you have Arduino IDE on your computer. Here is a quick tutorial on how to setup Arduino IDE to work with your ESP Board if you haven't done it yet.

And here is the code;

Assemble all the pieces like I showed you in the diagram

And here is the pdf file of the outside box. I made it out from 3mm mdf you can easily lazer cut this to achive the box that I made