Automatic Lighting Box With a Timer on Battery
18999 Views, 369 Favorites, 0 Comments
Automatic Lighting Box With a Timer on Battery
I propose a simple lighting scheme of the kitchen drawer to turn off the timer. The backlight is switched on for 15 seconds. (that's enough for me)
You See a Box With Light and Without
Hi
I propose a simple lighting scheme of the kitchen drawer to turn off the timer. The backlight is switched on for 15 seconds. (that's enough for me)
We Need:
- Magnetic contact 3 pins
- Magnet D15H4
- Transistor IRF840 (It can be any n-MOS transistor)
- Resistor 500 Ohm
- Resistor 300 Ohm (you can not put)
- Resistor 20 Ohm (to reduce current LED strip - you can not put)
- The capacitor 16c 22mkf
- 25cm LED strip
- 8pcs AA batteries (rechargeable batteries can not be used - high self-discharge)
- 1 m double wire.
The Scheme Is Very Simple
How Does the Magnetic Contact
As I approached a magnet contact switches
Solder the Resistor to the Transistor
Solder the Remaining Parts of the Scheme
Solder the Wires to the LED Strip and Connect to the Timer
Assemble Battery Pack
Test Duration and Current
Set in Place and Glue LED Strip
And Put a Magnet in Front of the Magnetic Contacts
You Can See the Result.
With and without illumination.
More details you can see on the video.
Thank you for attention.