Automata
How to make an automata display!
Supplies
Supplies I used:
cardboard (box with one of the longer sides cut out, and 4 cardboard circles)
scissors
glue/tape
toothpics/skewers
ring
Gathering Materials
Glue/tape the Circles Into Pairs to Make Them Stronger. Then Create Holes in the Center of Each Pair Using a Skewer.
Make Holes in Your Cardboard Box As Shown.
Slide One of the Circles Onto the End of a Skewer. Tape/glue It to the End to Secure It. Slide the Skewer Into the Top Hole in the Box As Shown.
Slide Another Skewer Through the Second Circle and Put It Through Halfway.
Slide the Second Skewer Into the Two Holes on the Sides of the Box.
Glue/Tape a Ring or Something Else You Would Like the Display on the Top Skewer Above the Box.
You Are Done! by Twisting the Horizontal Skewers Your Display Should Spin!
