Arduino/Android - BLUETOOTH RGB LED CONTROL ANDROID APP

Hello world! Today i made a app to control a RGB Led module with a Android Device. Contact me for the Open source code of the APP.

NOTE: If you bought a Common Anode LED connect it to 5v

I used a Common Cathode Led which needs to be connected to GND. The KY-019 Module from keyes.

Follow the next step for the Schematic, Code, parts list & APP

Download the APP on google play! Ask me for the Open Source Code! Contact@arduinosensors.nl

Simple Instructions to change the APPs RGB Pallette.

When clicking the IMAGE button the RGB rgb pallette will change to a Square instead of a circle.

When holding the IMAGE button the RGB rgb pallette will change back to a circle.

Just wire it up like the Schematic Upload the code and it should work!

Parts list.

1. Arduino uno, I used the RobotDyn uno.
2. HC-06 Bluetooth module
3. KY-016 Or any RGB Led
4. Jumper wire set MM/FF/MF.
5. Android app & Phone.

Good luck!

To find out how to rename the HC-06 Module and HC-05 Go to my other Instructable here