Arduino - WEBCAM PAN TILT CONTROL Using Servos & KY 023 Joystick

Hello world! Today i made a Pan tilt control with a old webcam, Dont mind the bad video, i said "OLD" LoL! Its pretty easy to build you need 2 servos a joystick, the schematic, code, and a little creativity. Follow the link for the Schematic Code & Parts List. I simply taped the Servos on top of each other, because i always take my projects apart after my instructables and videos are done.

Just wire it up like the schematic & it should work after uploading the code.

Make sure you have the servo.h library installed.

Parts List.

1. Arduino Uno, I used the robotdyn UNO.
2. KY-023 JoyStick Module.
3. 2 X Servo motor.
4. Jumper wires set. MM/FF/MF
5. Old Webcam or any other camera that you wanna use. Small is better.
6. Some creativity to mount the servos.

Good luck!