Arduino - Touch Sensor Switch Using the KY-036

Hello world! Here we go again!... I made another example on one of the sensors i got.

This time i made a example for the KY-036 Touch sensor.

Follow the next step for the schematic and code.

Just wire it up like the schematic and it should work after uploading the code.

Parts List.

1. Arduino Uno.
2. 3 Color led Module KY-016 (other separate leds will do to)
3. Touch sensor Module KY-036
4. Buzzer.
5. set of Jumper wires MM/FF/MF

Good luck!