Arduino - SOLAR TRACKER Using Photoresistors and a Servo

Hello world! Today i build a solar tracker with a mini solar panel a servo and 2 Photoresistors. Follow the next step for the schematic, Code & Parts list.

Simply wire it up like the schematic and it should work.

You need to play with the photoresistors a bit to get it to work. If you take a look at the video you see how i created a small wall between the 2 Photoresistors, to make it work properly. Good luck!

Parts list.

1. Arduino uno, I used the robotdyn uno.
2. 2x photoresistor.
3. 1x servo.
4. 2x 10 k Resistor
5. Jumper wire set MM/FF/MF.

Good luck!