Arduino - Nokia 5110 LCD Temperature Meter With the DS18B20

Hello World! I made a Temperature meter with a Nokia 5110 LCD.

I added the librarys and i made a Image for the LCD background with a rounded border and temperature icon which

is added to the LCD5110_Graph Libary and is named borderRoundedIcon.c

Follow the Next step for The Schematic Code & Parts List.

Just wire everything up like the schematic and upload the code.

Make sure you download and install the libraries first! You need them!

Put the pins on the LCD like following:

PIN1 on LCD ==>> PIN 12 on Arduino

PIN2 on LCD ==>> PIN 11 on Arduino

PIN3 on LCD ==>> PIN 10 on Arduino

PIN4 on LCD ==>> PIN 9 on Arduino

PIN5 on LCD ==>> PIN 8 on Arduino

PIN6 on LCD ==>> PIN 3.3 Volt on Arduino

PIN7 on LCD ==>> PIN 5 volt on Arduino

PIN8 on LCD ==>> PIN Ground on Arduino

Parts List.

1. Arduino Uno, I used the robotdyn uno.
2. DS18b20 Temperature Sensor.
3. Nokia 5110 LCD
4. Jumper wires MM/FF/MF.

Good luck!