Arduino Nano ESP32 How to Blink an LED Using Visuino Visual Programming
by RonFrtek in Circuits > Arduino
82 Views, 0 Favorites, 0 Comments
Arduino Nano ESP32 How to Blink an LED Using Visuino Visual Programming
Learn how to program a Arduino Nano ESP32 board to blink the built-in LED using Visuino.
Watch the Video!
What You Will Need
.jpg)
- Arduino Nano ESP32
- Visuino program: Download Visuino
Start Visuino, and Select the Arduino Nano ESP32 Board Type
Start Visuino as shown in the first picture Click on the "Tools" button on the Arduino component (Picture 1) in Visuino When the dialog appears, select "Arduino Nano ESP32" as shown on Picture 2
In Visuino Add & Connect Components
- Add "Pulse Generator" component
- Connect "PulseGenerator1" pin [Out] to Arduino Nano ESP32 > Digital pin [13]
- If you want to increase the speed of the blinking select "PulseGenerator1" and in the properties window change the "Frequency" value
Generate, Compile, and Upload the Project
- In Visuino, at the bottom click on the "Build" Tab, make sure the correct port is selected, then click on the "Compile/Build and Upload" button.
Play
After uploading the project to the Arduino Nano ESP32 board the internal LED will blink.
Congratulations! You have completed your LED project with Visuino. Also attached is the Visuino project, that I created for this Tutorial. You can download and open it in Visuino: https://www.visuino.com