Arduino - NRF24L01 Wireless Transceiver Module

In this tutorial we will learn how to use the nRF24L01 Wireless Transceiver Module.

We will control the servo motor with using the potentiometer via nRF24L01 Wireless Transceiver Module.

Arduino Board - https://goo.gl/Rqc5w2

nRF24L01 - https://goo.gl/M6fIIx

nRF24L01 Adapter - https://goo.gl/UWQtWy

Potentiometer - https://goo.gl/UWQtWy

Servo Motor - https://goo.gl/UWQtWy

F to F Jumper - https://goo.gl/UWQtWy

M to M Jumper - https://goo.gl/UWQtWy

9V Battery Plug - https://goo.gl/UWQtWy

9V Battery - https://goo.gl/UWQtWy

Breadboard - https://goo.gl/UWQtWy

Some Promotion Links

Flash Deals -- https://goo.gl/CVqg7P

Mega Stock Clearance -- https://goo.gl/eCbuiP

Arduino Kits -- https://goo.gl/uwr19e

More Budget 3D Printers -- https://goo.gl/uwr19e

Anet A8 3D Printer Promotion -- https://goo.gl/uwr19e

nRF24L01 2.4GHz Radio/Wireless Transceivers

There are many options how to connect your Arduino wireless. One of options available is nRF24L+

The module communicates with the controller via SPI interface.

You must use this module with capacitor or power adapterfor correct 3.3V

You must download and install the RF24 library for using nRF24L+ module. You can download from GitHub

RF24 Library - https://goo.gl/z8uy2d

I created two code, one of for the transmitter and other one for the receiver. You can only copy and paste the code into empty page of the Arduino IDE.

Get the Code - https://goo.gl/u6vFvX

You can subscribe to the my YouTube channel for more tutorials and projects. Subscribe for support. Thank you.

Go to my YouTube Channel - https://goo.gl/f0RHmR