Arduino LED Cube

This project requires some soldering expertise, but its an easy one and perfect for Arduino beginners.

parts I used:

* arduino UNO

* PCB board

* 64x diffused LEDs

* wires from ethernet cable

* 20x male pins for Arduino

* 20x shrink tubes

* 4x 100 OHM Resistors

drill 16 holes in a cardboard box or in wood for the layers to be held in place while you soldier them.

every layer is going to be connected to one resistor, the resistor is connected to -

[(x,y)-Pin]

(1,1)-13

(1,2)-12

(1,3)-11

(1,4)-10

(2,1)-9

(2,2)-8

(2,3)-7

(2,4)-6

(3,1)-5

(3-2)-4

(3-3)-3

(3,4)-2

(4,1)-1

(4,2)-0

(4,3)-A5

(4,4)-A4

Layers

[Layer-Pin]

a-A0

b-A1

c-A2

d-A3

If there is any questions just ask me and if you have made this please post an photo! :)

thanks for watching!