Arduino Box Controlled by TV Remote and CODE

This instructable show you how I have created a box controlled remote by a TV infrared transmitter. I have taken inspiration by this instructable Control Any Circuit With a TV Remote (and an Arduino). In this link you can discover library lets you decode the signal coming from your remote and instruction to download and install the library zip file. The aim of this project is recycle of old components and turn these in electronic reusable modules.

CODE (incomplete see .ino file attached)

#include .......

#include ........

#define MAX_TIME 150
#define LED_PIN_yellow 3
#define LED_PIN_green 4
#define LED_PIN_red 5
#define LED_PIN_blue 6
#define USB_RELAY 9
#define LAMP_RELAY 10

IRrecv irrecv(11);
decode_results results;
long lastPressTime = 0;
int state = LOW;
int blink_register = 0;
int blink_fast_register = 0;

void setup()
{
  pinMode(LED_PIN_red, OUTPUT);
  pinMode(LED_PIN_green, OUTPUT);  
  pinMode(LED_PIN_yellow, OUTPUT);
  pinMode(LED_PIN_blue, OUTPUT);
  pinMode(USB_RELAY, OUTPUT);
  pinMode(LAMP_RELAY, OUTPUT);
  irrecv.enableIRIn(); // Start the receiver
}

void loop() {
  if (irrecv.decode(&results)) {
// --------------------------------------------------------    
    // yellow leds
    if (results.value == 0x443038C7) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(LED_PIN_yellow, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value
// --------------------------------------------------------
    // green leds
    if (results.value == 0x4430D827) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(LED_PIN_green, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value
// --------------------------------------------------------
    // red leds    
    if (results.value == 0x443058A7) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(LED_PIN_red, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value
// --------------------------------------------------------
      // blue leds    
      if (results.value == 0x443002FD) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(LED_PIN_blue, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value
// --------------------------------------------------------
      // USB_RELAY 
      // BUTTON 4
      if (results.value == 0x443020DF) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(USB_RELAY, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value    
// --------------------------------------------------------
      // LAMP_RELAY 
      // BUTTON OK
      if (results.value == 0x44308877) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(LAMP_RELAY, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value    
// --------------------------------------------------------
     // all leds  
     // button 1 
     if (results.value == 0x4430807F) {
      if (millis() - lastPressTime > MAX_TIME) {
        // It's been a while since the last press, so this
        // must be a new press.
        // Toggle the state
        state = 1 - state;
        (blink_register = 0);
        (blink_fast_register = 0);
        digitalWrite(LED_PIN_red, state);
        digitalWrite(LED_PIN_blue, state);
        digitalWrite(LED_PIN_yellow, state);
        digitalWrite(LED_PIN_green, state);
      }
      lastPressTime = millis();
    }
    irrecv.resume(); // Receive the next value
  }
// --------------------------------------------------------
  // blink all leds  
  // button 2  
  if (results.value == 0x443040BF) {
      (blink_register = 1);  
      (blink_fast_register = 0);
      }
    if (blink_register == 1) {
       digitalWrite(LED_PIN_red, HIGH);
       digitalWrite(LED_PIN_yellow, HIGH);
       digitalWrite(LED_PIN_green, HIGH);
       digitalWrite(LED_PIN_blue, HIGH);
       delay(1000);
       digitalWrite(LED_PIN_red, LOW);
       digitalWrite(LED_PIN_yellow, LOW);
       digitalWrite(LED_PIN_green, LOW);
       digitalWrite(LED_PIN_blue, LOW);
       delay(1000);
    }
// --------------------------------------------------------
     // fast blink all leds
     // button 3
     if (results.value == 0x4430C03F) {
      (blink_fast_register = 1);  
      (blink_register = 0);
      }
    if (blink_fast_register == 1) {
       digitalWrite(LED_PIN_red, HIGH);
       digitalWrite(LED_PIN_yellow, HIGH);
       digitalWrite(LED_PIN_green, HIGH);
       digitalWrite(LED_PIN_blue, HIGH);
       delay(200);
       digitalWrite(LED_PIN_red, LOW);
       digitalWrite(LED_PIN_yellow, LOW);
       digitalWrite(LED_PIN_green, LOW);
       digitalWrite(LED_PIN_blue, LOW);
       delay(200);
    }
  
}