Arduino Blind Stick.......

Hello, guys so today we are going to make Arduino Blind Stick ...

there is a youtube tutorial for this video also if you wish you can watch it...

Click on me for youtube video

LET'S START !!

For this project we need

1. A Stick

2. Arduino UNO

3. Jumper wires

4. Led

5. A Buzzer

6. Ultrasonic sensor

7. A Tape or Hot Glue Gun

First of all, you need to do the wiring.

do the wiring from the diagram.

and remember the important part don't connect the gnd of ultrasonic sensor and buzzer in the same place. connect the gnd of the buzzer to the next gnd which is closer to vin.

now you just have to upload the code

you can also click me to preview the link

Remember to download the necessary Libraries.

now you have to paste the wiring on the stick

you can choose any long stick.

and do check the youtube video tutorial to check how it works...

thanks for reading

if you have any queries pls comment

if you like this post then also comment

and Don't forget to subscribe me on youtube..

Bye.....