Ardu-Flute (An Electronic Flute) !
by Piyush_ROBOTICS in Circuits > Arduino
213 Views, 1 Favorites, 0 Comments
Ardu-Flute (An Electronic Flute) !
Hi! My name is Piyush and this is my Ardu-Flute (An Electronic Flute) that makes sound by a passive buzzer.
hope you do this project with me and like it!
Supplies
.jpeg)
Items needed are :
- Wires
- 1 Rechargeable 3.7 V battery
- 2 Cut Male Wire
- 1 Arduino Pro Mini
- 5 Led's Led Strip
- 5 Tactile Push Button
- 1 Passive Buzzer
- 1 Mini Potentiometer
- 1 Servo Motor
- 1 Servo Shaft
- Wooden Sticks
- FTDI
Other things Needed :
- Arduino IDE
- Soldering Iron
- Solder Wire for Soldering Iron
- Glue Gun
- USB Mini-b (5 pin) Cable
- Computer
Assembly of Structure (main Body)
Get some wooden sticks and attach them to the Water Flow Sensor in the way shown in the image.
Adding the Buttons
When adding the buttons, make sure that it is comfortable for your hand. This is shown in the picture of my hand.
Finish the Flute
Use the schematic provided and make the Ardu-Flute using the components!
My Story of Major Problem I Faced
I had to control the volume of the buzzer with the Water Flow Sensor without a VCC pin?
How?
Code and Connections
If you want to see how the code and the Adu-Flute Connections, then watch the video (Highly Recommended).
Downloads
Demonstration
Watch this Demonstration!
Comment If You Liked The Project And Feel Free To Comment Any Questions For Help!