Anatomy Animals
![P10503650.jpg](/proxy/?url=https://content.instructables.com/FXQ/4LPZ/IAG0AO1R/FXQ4LPZIAG0AO1R.jpg&filename=P10503650.jpg)
![P1050339 copy.jpg](/proxy/?url=https://content.instructables.com/FNR/ZXP7/IAEK9VMJ/FNRZXP7IAEK9VMJ.jpg&filename=P1050339 copy.jpg)
![b.jpg](/proxy/?url=https://content.instructables.com/F85/EZ32/IAEJSOGR/F85EZ32IAEJSOGR.jpg&filename=b.jpg)
To make one of these creatures you will need:
- Craft Felt
- Scissors
- Hot Glue
- Velcro
- Iron
- Sewing Machine +Thread
- Freezer Paper
- Printer Paper
- Printer: to print the sewing pattern
Printing
![d.jpg](/proxy/?url=https://content.instructables.com/FPK/FOKB/IAEJSOGS/FPKFOKBIAEJSOGS.jpg&filename=d.jpg)
![e.jpg](/proxy/?url=https://content.instructables.com/FC0/NUYZ/IAEJSOGT/FC0NUYZIAEJSOGT.jpg&filename=e.jpg)
![f.jpg](/proxy/?url=https://content.instructables.com/FTK/FHXM/IAEJSOHA/FTKFHXMIAEJSOHA.jpg&filename=f.jpg)
![g.jpg](/proxy/?url=https://content.instructables.com/FF9/LIBK/IAEJSOIR/FF9LIBKIAEJSOIR.jpg&filename=g.jpg)
![h.jpg](/proxy/?url=https://content.instructables.com/FVF/7648/IAEJSOK8/FVF7648IAEJSOK8.jpg&filename=h.jpg)
- Start off by ironing a piece of freezer paper into a piece of printer paper. Place the coated side of the freezer paper down against the printer paper and iron it for just a few seconds. The freezer paper should stick well enough so that it is able to go through a printer- don’t iron it too much because if they adhere too well they will be hard to separate later.
- When printing, make sure to print onto the freezer paper and not the printer paper. Print one sheet with intestines and one sheet with an animal.
- Once you have everything printed, remove the printer paper from the freezer paper. If it doesn’t peel off easily, run the iron over it for a couple of seconds and immediately after removing the iron try peeling it off again.
- Cut out each individual square.
Choose Your Colors
![i.jpg](/proxy/?url=https://content.instructables.com/F1E/O62H/IAEJSQ5V/F1EO62HIAEJSQ5V.jpg&filename=i.jpg)
![j.jpg](/proxy/?url=https://content.instructables.com/F33/AFA8/IAEJSQWT/F33AFA8IAEJSQWT.jpg&filename=j.jpg)
![k.jpg](/proxy/?url=https://content.instructables.com/FYF/BCP9/IAEJSQWU/FYFBCP9IAEJSQWU.jpg&filename=k.jpg)
- Choose the colors that you will be using for each organ.
- The larger squares on the printed sheet are 2.5” x 2.5” and the smaller ones are 2.5” x 1.25”.
- For the squares that are 2.5” x 2.5”, your pieces of felt should be cut to measure 3” x 6”.
- For the squares that are 2.5” x 1.25”, your pieces of felt should be cut to measure 3” x 3”.
- Once you have cut the felt, fold each piece in half and iron the appropriate organ to top.
Sew and Cut
![p.jpg](/proxy/?url=https://content.instructables.com/FGI/Y6XW/IAEJSOGQ/FGIY6XWIAEJSOGQ.jpg&filename=p.jpg)
![l.jpg](/proxy/?url=https://content.instructables.com/FSJ/2HLV/IAEJSQYA/FSJ2HLVIAEJSQYA.jpg&filename=l.jpg)
![m.jpg](/proxy/?url=https://content.instructables.com/FDU/JVJV/IAEJSQYB/FDUJVJVIAEJSQYB.jpg&filename=m.jpg)
![n.jpg](/proxy/?url=https://content.instructables.com/FJH/8IKG/IAEJSQZR/FJH8IKGIAEJSQZR.jpg&filename=n.jpg)
![o.jpg](/proxy/?url=https://content.instructables.com/FP2/2WNC/IAEJSQZS/FP22WNCIAEJSQZS.jpg&filename=o.jpg)
- Sew over the freezer paper. Sew over the solid black line first and then sew each dashed line individually.
- For the ones that are colored, sew the red line first, the blue line second and the dashed lines last.
- When you are done sewing, peel away the freezer paper and cut each organ out, making sure not to cut too close to the thread.
The Body
![P1050299 copy.jpg](/proxy/?url=https://content.instructables.com/FN6/CLBB/IAEK9VKT/FN6CLBBIAEK9VKT.jpg&filename=P1050299 copy.jpg)
![P1050303 copy.jpg](/proxy/?url=https://content.instructables.com/FZ7/EAN8/IAEK9VLA/FZ7EAN8IAEK9VLA.jpg&filename=P1050303 copy.jpg)
![P1050307 copy.jpg](/proxy/?url=https://content.instructables.com/FIU/DOA3/IAEK9VLR/FIUDOA3IAEK9VLR.jpg&filename=P1050307 copy.jpg)
![P1050312 copy.jpg](/proxy/?url=https://content.instructables.com/FDV/R1XM/IAEK9VM8/FDVR1XMIAEK9VM8.jpg&filename=P1050312 copy.jpg)
- Iron the printed sheet onto a piece of felt. Place another piece of felt of the same color underneath. Sew the outline of the animal through both pieces of felt.
- Then, with no thread, “sew” over the partial oval located on the belly of the animal.
- Peel away the freezer paper.
- You should see a faint outline of the oval in the felt. Use scissors to cut along that line- only cut the top layer of felt.
- Cut away excess felt that is around the outline of the animal.
The Face
![P1050318 copy.jpg](/proxy/?url=https://content.instructables.com/FSE/NVNB/IAEK9VMF/FSENVNBIAEK9VMF.jpg&filename=P1050318 copy.jpg)
- Cut out the eyes, nose and any other parts of the face you want your creature to have.
- Glue them on with hot glue.
Patch It Up
![P1050324 copy.jpg](/proxy/?url=https://content.instructables.com/FCF/UU4D/IAEK9VMI/FCFUU4DIAEK9VMI.jpg&filename=P1050324 copy.jpg)
![P1050332 copy.jpg](/proxy/?url=https://content.instructables.com/F33/CX6D/IAEK9W9I/F33CX6DIAEK9W9I.jpg&filename=P1050332 copy.jpg)
- Cut out small squares of Velcro.
- Hot glue the squares to the belly of the animal, one on each side of the incision OR glue a strip of Velcro to the back of each bandage.
- Throw the organs in and use the bandages to close it up.