Aluminum Foil Ball(easiest Way to Make)

Hi guys welcome back again.

Today we are going to make an item

from a worldwide challenge called Japaneese polished aluminum ball challenge.

Yes today, we are going to make the aluminum polished foil ball!!!!!

So let's get started.

1.a hammer

2.foil

3.sand paper

The first thing we do is that we tear a piece of foil about your thumbs size as shown in image 1.

Crush it into a small ball ,

then cover it with a piece of foil again.

Do this procedure several times until you are satisfied with the size.

THE BIGGER THE BETTER

The first image is a crumbled foil ball.

The second image is a strong foil ball.

To turn that to this, i hammered it until all the opening are closed.

This also makes it strong and removes air pockets from the foil ball.

Here is the hard part.

Here is were u spend most of your time making this.

This is polishing.here i don't have a sandpaper

but the only tool that i used when i made this was a marble tile

The tile makes it shinier and blends all the line in the foil ball..

But still i suggest to use a sandpaper because most of the people who do this use sand paper

congratulation if u completed the challenge .

This is the best way that i founded myself to make this.

Hope you enjoy

Have fun creating it