Airsoft Mag-Pulls (Magpul)

Today I'm going to show you how to make magazine pull assists (magpuls). These "Magpuls" are originally created by a company ironically named "Magpul", and were designed for military use. Their purpose is to make it easier to pull a magazine from a pouch. The real steal magpuls the military uses, are made out of high grade rubber and plastic. The ones I show you, are made from only house-hold materials. 

Edit: I'm doing another tutorial, Subscribe to me for sneak peaks on my projects.

-Thanks alot guys!

Again, I'm not showing you how to make the rubber ones, These are made of household materials.

Materials:

Duct Tape (Preferably Black)

Magazine For Your Weapon


Tools:

Scissors

Cut a piece of tape about 5 inches long, and then cut it in half long-ways.

Cut 2 inches off of one of the pieces of tape you have.

Apply the smaller piece of tape in the center of the longer piece so it looks like so.

Apply piece of tape to magazine as seen below.

Cut another, longer piece of tape, about 10 inches long, and apply around bottom of mag.

You have finished your first magpul. You can continue to do this for all your mags, Or just leave this one how it is.

Remember: These are for functionality, Not for looks.

Alright, Well I hope my first instructable is a big hit in the airsoft scene.

-Planetmuncher