Airsoft Grenade

This airsoft grenade works well and uses common items. It does use a little firework though(some people don't like that) but it is easy and cheap to use, plus it isn't completely destroyed when used so it can be reloaded and used again and again. Hope you are able to construct this with my instructions...this is my first instructible. Enjoy!

You'll need-

-Paper

-pocket knife

-PVC pipes(size hardly matters,whatever works)

-little dynamites of some kind(very cheap)

-airsoft bbs

-drill(just use whatever drill bit works for the size of firework you use)

-a liter for when you're done :)

Cut your PVC pipe about as long as I did, a little more than two inches(can be shorter or longer) I used a hack saw on mine, but whatever works for you.

Now you gotta drill a hole in the center of the PVC piece, and go all the way through to the other side, as straight as possible. The bit I used is 1/4 in. It's great for the fireworks I used. (Second image)

Make sure your fireworks fits snugly in both holes, And will not fall out. Put 10-15 bbs in one end, then shove a piece of paper in there tightly to hold them in. Do this in both ends and then you're ready to blow it up. ;)

Please don't hurt yourself or others with this... Because it really can do some damage.