Air Gun Surpressor
A working suppressor for my air pistol
Gather Materials
You will need an old flashlight, and some grommets
Tools:
3/8 socket
Screw driver
Super glue
Drill bit
Tools:
3/8 socket
Screw driver
Super glue
Drill bit
Take Apart Flashlight
Take apart the flashlight so that it's just a tube, drill holes through the caps so that they fit a bb
Grommets and Spacers
Put grommets in the tube and space them using strips from a pop can
Grommets Just Don't Fit
The grommets just don't fit so you need to trim the edges and push them in, make sure the part that sticks out faces the gun
Put It Together
Put in the grommet so that the point faces the gun and then space them with a strip of aluminum can
Finish It
Super glue the cap to the gun and screw on the suppressor
Disclaimer
Do not use if it is illegal where you live, never point any gun at anyone, don't be stupid, etc.
This instructable may be kinda confusing, I apologize. Use your knowledge to figure out a way to make one to fit your own gun, it only works on gas powered guns, not electric (but it'll still look cool)
HAVE FUN!!
This instructable may be kinda confusing, I apologize. Use your knowledge to figure out a way to make one to fit your own gun, it only works on gas powered guns, not electric (but it'll still look cool)
HAVE FUN!!