Agate Magnets
![2017-07-22 13.38.59.jpg](/proxy/?url=https://content.instructables.com/F1Q/SPZB/J5CQDWK4/F1QSPZBJ5CQDWK4.jpg&filename=2017-07-22 13.38.59.jpg)
![2017-07-22 13.31.56.jpg](/proxy/?url=https://content.instructables.com/FOV/2FEZ/J5CQDW83/FOV2FEZJ5CQDW83.jpg&filename=2017-07-22 13.31.56.jpg)
I'm not sure if these pieces are actually geodes, druzies, or agates. I find them on eBay under searches using all of those keywords so it's never really been clear. I know that geodes have little mineral formations/crystals etc. and some of the pieces I'm using may or may not fall under the agate name used, but because I can't find a definite answer, I'm going with "agate".
These are great easy to make magnets. They make wonderful gifts and are very pretty.
BoM
![2017-07-22 12.15.45.jpg](/proxy/?url=https://content.instructables.com/F5R/HFB1/J5CQDMCG/F5RHFB1J5CQDMCG.jpg&filename=2017-07-22 12.15.45.jpg)
Agate slices (I get mine from eBay)
Magnets (craft store)
Epoxy/glue
Metallic paint & brushes (craft store)
Paint
![2017-07-22 12.56.02.jpg](/proxy/?url=https://content.instructables.com/FOJ/FKH1/J5CQDPRN/FOJFKH1J5CQDPRN.jpg&filename=2017-07-22 12.56.02.jpg)
![2017-07-22 12.56.19.jpg](/proxy/?url=https://content.instructables.com/FUB/XLXD/J5CQDPSK/FUBXLXDJ5CQDPSK.jpg&filename=2017-07-22 12.56.19.jpg)
![2017-07-22 12.56.39.jpg](/proxy/?url=https://content.instructables.com/FDX/9SC4/J5CQDPSL/FDX9SC4J5CQDPSL.jpg&filename=2017-07-22 12.56.39.jpg)
Carefully paint the edges of the slice and allow to dry. Depending on the piece, you may want to paint the back as well but this is optional.
Glue
![2017-07-22 13.17.53.jpg](/proxy/?url=https://content.instructables.com/FJS/V993/J5CQDTRR/FJSV993J5CQDTRR.jpg&filename=2017-07-22 13.17.53.jpg)
![2017-07-22 13.27.08.jpg](/proxy/?url=https://content.instructables.com/FZK/4Y7Y/J5CQDW67/FZK4Y7YJ5CQDW67.jpg&filename=2017-07-22 13.27.08.jpg)
![2017-07-22 13.38.35.jpg](/proxy/?url=https://content.instructables.com/FQW/Y612/J5CQDWK1/FQWY612J5CQDWK1.jpg&filename=2017-07-22 13.38.35.jpg)
When your slice is dry, glue the magnet to the back and allow to dry/cure fully before use. Some of my magnets are self-adhesive and I still put epoxy on them.