Advanced Engineering Design Apparatus
by esthergeorges in Craft > Reuse
161 Views, 1 Favorites, 0 Comments
Advanced Engineering Design Apparatus
PURPOSE:
The purpose of this apparatus is to reduce the amount of contact people come into at checkout and places where people often have to use the same device to purchase items. With this stylus, you are able to buy items without the worry of catching germs through other peoples nasty bacteria hands.
Supplies
Cotton Swab
Scissors
Aluminum foil
Unscrewable pen
Clear or masking tape
Bottle cap with water
Unscrew Cap or Bottom on Pen and Take Out the Ink Chamber Along With the Spring
Screw back on the top or bottom on the pen (Inside of the pen should be EMPTY !!)
Cut Cotton Swab in a Diagonal Motion, for Better Fit in Hole
Insert the Pointed End of Cotton Swab in the Tip of the Pen
Grab a Piece of Tape and Secure the Cotton Swab
Cut a Piece of Aluminum Foil, About the Size of Your Thumb
Wrap Around Pen So That One End Touches the Cotton Swab
Take a Couple Pieces of Tape and Secure the Top and Bottom of the Foil to the Pen
DON’T soak cotton swab in water, lightly dip the cotton swab into the cap with water
Make sure your fingers are on foil while in use after the cotton swab is dipped
Begin the germ free usage of pin pads !!!