Aduino 16x2 Lcd Custom Char. Clock

If you want to make a DIY project

so it's perfect for you

and you also gift it to someone

Need

>LCD 16x2

>Arduino UNO, nano

>atmega 3128p

>3x 10k resistor

>drill pcb

Body of clock

>ice cream stick

>hot gun with glue

>push switch x3

>wire

my channel

I'm using ice-cream stick

which I cut in this size and glue them

these connection are as follows

the 10k pull-down resistor is used on the input

pin 10 ,9 ,8

for it making small I use atmega 328p

direct on pcb and the last i glue all the components and glue it is places

this is a simple code but not perfect. I future I make it perfect one