Adjustable Depth Stand

This an adjustable depth stand, for your monitor or whatever you want.

From 312 mm to 356 mm adjustable depth and 80mm height (and is designed for a 16.8mm or less height top surface)

Files available on Thingiverse too!

Yo need a 3D Printer and... that's all!

Well... and a wood, plastic or anything useful as the tand surface

TO PRINT TIGHTING SCREW AND BUSHES

• Layer height: 0.12
• Infill: 100% (we need a strong partt)
• Supports: No
• Use Skirt,for the screws, is not necessary but depending your bed could've some issues without it.

TO PRINT SUPPORTS MALE AND FEMALE

• Layer height: 0.24
• Infill: 10% (better use 4 wall-width count)
• Supports: No (Are included with the STL) Printing the "Male" be carefull with the orientation of the included supports, that are touching the bed.

Remove the supports and rafts and that's all

Is quite easy, check the video if you've any doubt