Acrylic Garage Sign-Board

by Dinesh Kodai in Workshop > Organizing

4930 Views, 46 Favorites, 0 Comments

Acrylic Garage Sign-Board

DSC0588.JPG
Water1.JPG
Garaze1.JPG
Clear1.JPG
A simple acrylic Garage sign-board '4 mm' sheet.
it's my 2nd design project done in 2011.


material used:
acrylic sheet 4 mm.
mini saw.
spray-paint can
G-clamps.
wet and dry paper.
printer.
paper-glue.
safety mask.
safety eye wear.
lettering.
electric-drill.
steel-ruler.

Marking,cutting,polishing

after cut.jpg
sw ac.jpg
cut cp.jpg
wet n dry cor.jpg
Drilt.jpg
acrylic sheet 52 x 32 cm.

using G-clamps to hold the sheet.

using a saw to cut round edge.

wet and dry paper to polish the edge.

Edit,print,gluing

draw.jpg
printin.jpg
Aftr prnt.jpg
Gluet.jpg
Aftr glu3.jpg
using adobe Ps to draw a tractor.

printing the image.

gluing it onto the plastic sheet.

left to dry.

Engraving

Greve.jpg
Graveo.jpg
Photo2283.jpg
Photo2291.jpg
Photo2296D.jpg
Photo2294.jpg
using a dc toy motor to engrave onto the sheet.

constant progress onto picture 3-6.

Spray Painting

paint.JPG
Photo2321.jpg
Photo2341.jpg
DSC05697i.JPG
DSC05701.JPG
safety:

work in a well ventilated area.

use mask and safety eye wear.

red-orange florescent paint.

Lettering

DSC05701.JPG
Photo2303.jpg
DSC05722.JPG
DSC05719.JPG
DSC05748.JPG
DSC05743.JPG
applying lettering onto the sheet.

Final-product

DSC0588.JPG
Nite2.JPG
DSC05880i.JPG
Led2.JPG
Led1.JPG
Clear1.JPG
Water2.JPG
Water1.JPG
Clear2.JPG
Garaze2.JPG
Garaze1.JPG
focusing a torch over the board.

led is inserted onto the board.

...