Accelerometer Interfacing With Mediatek Linkit One Board
by Got007 in Circuits > Sensors
1405 Views, 4 Favorites, 0 Comments
Accelerometer Interfacing With Mediatek Linkit One Board
![1@2x.jpg](/proxy/?url=https://content.instructables.com/FEY/OSHR/IIDH9GGN/FEYOSHRIIDH9GGN.jpg&filename=1@2x.jpg)
Today i will show how Mediatek Linkitone Board works with accellerometer ADXL335.
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer
with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Requirements
![PicsArt_12-20-02.27.51.jpg](/proxy/?url=https://content.instructables.com/F0O/8WPU/IIDH9GGQ/F0O8WPUIIDH9GGQ.jpg&filename=PicsArt_12-20-02.27.51.jpg)
ADXL 335
Accelerometer Sensor
Mediatek LinkIt One Board
Connecting Wires
Connections
VCC : 3.3V
On Board
GND :Ground
X_OUT: A0
Y_OUT: A1
Z_OUT :A2
Code,Compile and Run
![IMG_20151220_143651.jpg](/proxy/?url=https://content.instructables.com/F75/0TYS/IIDH9GGP/F750TYSIIDH9GGP.jpg&filename=IMG_20151220_143651.jpg)
Upload The Code And You are Ready To go!!!! You have succesfully made a friendship between ADXL335 and Linkit One Board...
Thanks For watching!!!! Have Fun!!!