AV Cable Holder (for Shelves or Tables)

I designed a cable holder to hold the various cables we plug into our television to organize and stop them from falling behind our shelf when not in use. This was designed to use with our retro gaming systems. I had to measure the radius of the cables to make sure they fit perfectly, and I measured the width of the shelf so it would fit. It works really well to organize our gaming cables. Here is the download if you want to print it yourself.

for this project I used Fusion360 and a 3d printer

I designed it using Fusion360. I made three (3) versions before I got one that fits on my shelf. This design is modifiable to fit other shelfs and will hold three (3) sets of AV cables in place.

I have a Prusa 3d printer and I used PLA with 0.3mm layers. It took around 2 hours to print.

This printed AV cable holder does not require additional assembly so once printed you can place directly on the edge of your shelf or table and place the AV cables in the individual separators.