ARDUINO AIRSOFT TIME BOMB GAME

Take a look at the video to see it at work.

Check the next steps for the Schematic and code.

Just connect it as the schematic shows. Upload the code and it should work.

I added a on/off switch a reset button and a power jack, those are not

shown on the schematic but easy to add.

To add a reset button just add a button to the reset pin, put one wire in the

reset pin and one in ground.

You can also add extra buttons for C and D as shown on the schematic.

My final project will have a red button for the red team and green for green team.

Parts list.

1. Arduino UNO
2. Potentiometer (+ knob optional)
3. buzzer
4. On/Off switch
5. 1 Channel relay
6. lcd 1602 - Blue Backlight
7. 4x4 Keypad
8. 2x Red leds, 1x green led.
9. 2x 220 Ohm (220 R) resistors
10. A set of MM FF MF Jumper wires
11. Female Power jack & adapter (optional) (You can also add batterys of course)
12. 2 buttons for C & D(optional)
13. 1 button for reset (optional)
14. Alarm Strobe? Alarm Sound?

(i used male and female audio plugs to connect the lamp)

There are multiple codes inside.

Open and upload the Time_Bomb_Airsoft_Game.ino

If you connected everything the right way it should work right away.

Be creative! make a nice enclosure for it.

Good luck!