ARDUINO 101 | INFRARED RECEIVER AND REMOTE

This Instructable will guide you through the process of testing an IR RECEIVER and REMOTE with an Arduino ProMini.

1) Arduino ProMini: Arduino

2) Half-sized breadboard: Breadboard

3) VS1838B IR RECEIVER: Receiver

4) IR REMOTE: Remote

5) Male jumper wires: Jumper wires

6) FT232RL: FT232RL

IR RECEIVER GROUND -> ARDUINO GROUND

IR RECEIVER VCC -> ARDUINO VCC

IR RECEIVER SIGNAL -> ARDUINO ANALOG PIN 0

1) Download the code.

2) Verify it.

3) Select port, board, and upload the sketch.

* SKIP TO 2:35 *

Pressing a button on the remote will display its code on the serial monitor. Note it down to use it in different applications.