A New K'nex Grenade!

by Jedi_man in Living > LEGO & K'NEX

2235 Views, 2 Favorites, 0 Comments

A New K'nex Grenade!

100_1427.JPG

This is my K'nex grenade, It does need some changes though. It doesn't explode far, and it takes a med-long time to rebuild. But it does look cool!

Get the Plastic!

100_1429.JPG
100_1430.JPG
100_1431.JPG
100_1432.JPG
100_1433.JPG
100_1434.JPG
100_1435.JPG
100_1437.JPG
100_1438.JPG
100_1439.JPG
100_1440.JPG
100_1436.JPG
100_1445.JPG
100_1446.JPG
100_1464.JPG

Get your stuff. Read the list or look at the pics, or both. You decide!
))>>{CONNECTORS}<<((
x16 Green connectors and x2 Metallic greens.
x4 Orange (Black version) connectors.
x3 Dark grey connectors.
x2 Red connectors (Granite version).
x1 A pile of sharpanel of your choice.
x1 Light grey connector.
x2 Snowflake conenctors (Black version).
x8 Yellow connectors (Grey version).

))>>{RODS}<<((
x18 Green rods.
x5 White rods.
x1 Blue rod.
x1 Yellow rod.

))>>{MISC.}<<((
x1 Tiny blue connector.
x1 Blue ring.
x1 Y connector.
x3 Rubber bands.

Now that we have all the parts, let's have some FUN!

The Body

100_1447.JPG
100_1448.JPG
100_1449.JPG
100_1450.JPG
100_1451.JPG

We will make the body now!

Pic #1: Get this stuff.
Pic #2: Make these.
Pic #3: Get these things.
Pic #4: Make this.
Pic #5: Make 7 more.

Good! Good! We made the body!!! Now we will make the pin next!

Pins & Needles

100_1452.JPG
100_1455.JPG

Let's make the pin shall we?

Pic #1: Get these.
Pic #2: Make this, and save the Y connector for later.

That was easy... Now we make the handle!

Ze Handle

100_1456.JPG
100_1459.JPG
100_1460.JPG
100_1461.JPG
100_1462.JPG
100_1463.JPG

You can use the handle to clip the grenade onto your pants!
We will build it now!

Pic #1: Get all this stuff.
Pic #2: Make this.
Pic #3: Slip the pin in here.
Pic #4: Slip a blue rod through here and add some grey connectors like this.
Pic #5: Another view.
Pic #6: Don't forget to add the green rods onto the red connectors!

We made the handle, now we put it all together! MUHAHAHAHAAA!

Putting It All Together

100_1465.JPG
100_1466.JPG
100_1468.JPG
100_1478.JPG
100_1470.JPG
100_1471.JPG
100_1473.JPG
100_1475.JPG
100_1476.JPG

Now we will put it together!

Pic #1: Get this junk- I mean stuff.
Pic #2: Attach this onto that.
Pic #3: Slide the pin into the hole.
Pic #4: Push the green rods on the handle into the green connectors.
Pic #5: Add your shrapnel.
Pic #6: Add the bottom to keep the shrapnel in.
Pic #7: Push on the snowflake connector on the bottom to make room for the Y connector to fit on to the yellow rod.
Pic #8: Attach the Y connector to the yellow rod.
Pic #9: Put rubber bands around the center.

Now that it's built, you may explode the grenade. All you need to do is pull the handle off the grenade and throw. Have fun :)