A Star Ornament

I made this Star Ornament from an old Bicycle chain

I used an old bycicle chain.

I put it in a plasitc bottle and put some degreaser to it.

Shake the bottle and leave it like this for an hour.

1. A bycicle chain

2. Chaintool ( to take out the little pin )

3. Plastic bottle

4. Degreaser

5. A jig to keep the star in place

6. CA Glue

7. A string or a piece of wire

To make the Stars.... your chain has to be 5 chain links long

Lay the chain into the chaintool and screw the pin out the chain link.

After the chain is loose you make a loop and put the pin back into the chains links.

Use the chaintool again.

Now you have a loop of 5 chain links.

Lay the chain on the jig between the pins. So that you can fine tune your star.

Is your Star looking good .... use CA glue to hold the chain links together.

Wait till the glue is dry and your Star is ready.

Make a small loop from a piece of wire to hang the Star in the Christmas tree.

Hope you injoy making it.

For full instructions you can watch the video