A Simple Free Energy Generator:

In this instructable, you will be taught how to make a free energy generator that operates without a battery.It's a nice and simple science project for schools and colleges that anyone can make easily at home.

Click for full length video

Youtube Channel

You will need 2 DC Motors and a plastic base.Connect the shafts of the motors with a plastic gear or plastic pulley and glue them on the plastic base.

Now connect them in parallel in opposite polarity and then open one of the wires as shown in the picture above.

Full length video

Now you will need a DC capacitor and an LED bulb.Connect the capacitor to one of the DC motor and connect the LED bulb according to its polarity to the capacitor and the DC motor tapping point ie. the positive terminal of the LED bulb will be connected to the positive terminal of the capacitor and same will be followed for the negative terminals.

capacitor= 2.7 volt 100f

LED = 1.5 volt

DC Motors=3 volts

Full length video

Now connect a 10 kilo ohm resistor to the left open terminals as shown.

Its complete now.

Full length video

Now connect a 3V to 4V battery to the capacitor for a few seconds so that the charge starts flowing through the circuit.As soon as you see the LED bulb glowing remove the battery.What you will notice is that even after you have removed the battery, the circuit still keeps on operating.

So that was all guys about the so called "Free energy Circuit"

Full Length video

Thankyou!