A Shocking Operation

Operation is one of the most classic board games of all time. The game of removing strange ailments from a particularly strange, red-nosed patient using a pair of tweezers.

Of course, if you touch the edges of the openings, you will be punished with a simple, obnoxiously loud sound and the patient's nose will light up.

But what if we changed that?

Warning: Do not make this unless you will not blame us for any injuries that stem from the production or usage of this game.

Tools:

• Soldering Iron
• Screwdriver
• X-Acto Knife
• Hot Glue Gun

Materials:

• Electronic Mosquito Swatter
• Solder
• Hot Glue Sticks
• Operation Board Game
• Wire
• Slide Switch
• Aluminum Foil

Using the X-Acto Knife, cut a circle around each "pin" attaching the cover to the board. Once cut, the cover should be able to be removed easily. Separate the cover from the board.

Remove the screws from the black cover and remove it, exposing the wiring.

Take out the circuit board of the mosquito swatter.

Solder the switch to the positive end of the swatter and a wire to the negative end (these are the wires connecting to the battery).

Solder the wire with the switch to the positive end of the battery container. Then, solder the negative end to the metal plate.

Solder the output wires of the swatter component to two long wires. Using the X-Acto Knife, cut the base of the plastic piece of the tweezers, allowing for the long wires to fit through. Pull the wires through.

Wrap a piece of aluminum foil around each of the long wires, using hot glue to hold the wires in place. Next, glue the "electrodes" to the grip (textured part of the tweezers).

Cut a rectangle into the paper cover of the game. The rectangle should be wide enough to fit the switch and long enough to accommodate for the switch's slide. Add a "+" and "-" to signify the game's danger level.

Reassemble all of the parts. There may be a slight bulge, but it will not affect the game.

Now you can enjoy your newly modified version of operation! You can turn the shocking component on or off using the switch. Have fun!