A Safe, Functional, Leave-no-trace Campfire Pit

by notsosharp in Outside > Camping

1982 Views, 11 Favorites, 0 Comments

A Safe, Functional, Leave-no-trace Campfire Pit

IMG_0875.JPG
IMG_0082.jpg

For more than forty five years I have had the opportunity to paddle many of north western Canada’s wild rivers. Pulling ashore after a day of paddling, I look forward to a meal cooked over an open fire. The last thing I want to see are scars, litter or signs of others who have passed this way. I also want to make sure that we leave no trace of our passing so I have developed a way of making safe, functional, leave no trace campfire pits. These fire pits contain and direct the fire and, when finished, no trace can be seen.

Selecting the Pit Place

IMG_0862.JPG
IMG_0863.JPG

Sighting a riverside fire pit is the most important step in the process. Select a steep section of large cobbles along of a river bar below the high water line.

Preparing the Pit

IMG_0865.JPG
IMG_0864.JPG
IMG_0866.JPG

Remove cobbles to form a pit about a foot deep, foot wide and about two feet long going into the slope. Place larger rocks level along the sides of the ditch type pit. Check to make sure the grill will fit across the rocks.

Setting the Fire and Grill

IMG_0868.JPG
IMG_0867.JPG

Set kindling length wise along the bottom of the pit and place larger sticks on top. Light the kindling. The fire will move up the pit and ignite the larger sticks. Once these are burning well, add larger pieces of wood then place the grill over the fire. For slow cooking, wait until the fire has died down and a bed of coals have developed. This pit can be used for cooking breakfast. Try to make sure that only coals are left after your last fire.

Putting Out the Fire

IMG_0085.jpg
IMG_0086.jpg
IMG_0087.jpg
IMG_0088.jpg

When finished using the fire pit, pour liberal amounts of water over the coals, then cover with sand. Refill the pit with the cobbles that were removed. Place the larger rocks in the stream.

Cleaning Up the Site

IMG_0090.jpg
IMG_0091.jpg
IMG_0092.jpg
IMG_0093.jpg
IMG_0094.jpg

When finished, you should not be able to see a trace of the fire pit or that there was a fire. Make sure that there are no traces of your cooking or use of the area. Next spring, following high water, any traces of human use will have completely disappeared.