A Pallet Christmas Tree
![A Rustic Pallet Christmas Tree](/proxy/?url=https://content.instructables.com/FJ3/ECLV/IHUUDCTR/FJ3ECLVIHUUDCTR.jpg&filename=A Rustic Pallet Christmas Tree)
Insted of chopping a Christmas tree.... I made one myself
What You Need....
![2.JPG](/proxy/?url=https://content.instructables.com/FM9/MZB8/IHUUDCFU/FM9MZB8IHUUDCFU.jpg&filename=2.JPG)
1. A lot of Pallet wood and a Pallet block
2. A broomstick
3. A Sander
4. Wood glue
5. Mittersaw or a handsaw or any saw you can cut wood with....
6. Forstner bit. I used a 25 mm.
Lets Get Started....
![3.JPG](/proxy/?url=https://content.instructables.com/FGC/8JAA/IHUUDCGD/FGC8JAAIHUUDCGD.jpg&filename=3.JPG)
![4.JPG](/proxy/?url=https://content.instructables.com/F7V/DPJN/IHUUDCGF/F7VDPJNIHUUDCGF.jpg&filename=4.JPG)
![5.JPG](/proxy/?url=https://content.instructables.com/F5M/54M5/IHUUDCGX/F5M54M5IHUUDCGX.jpg&filename=5.JPG)
![9.JPG](/proxy/?url=https://content.instructables.com/FHF/BNDA/IHUUDCI2/FHFBNDAIHUUDCI2.jpg&filename=9.JPG)
![6.JPG](/proxy/?url=https://content.instructables.com/FNU/2JVX/IHUUDCHG/FNU2JVXIHUUDCHG.jpg&filename=6.JPG)
Sand all the wood
Measure all the boards in to the right lengths. You can find this on the pdf file.
Cut the boards in into the lenghts.
Find the centre of the boards.
Drill the holes with the forstner bit.
Downloads
Nearly Done
![7.JPG](/proxy/?url=https://content.instructables.com/FIW/MM8Y/IHUUDCHJ/FIWMM8YIHUUDCHJ.jpg&filename=7.JPG)
![8.JPG](/proxy/?url=https://content.instructables.com/F6O/4BTJ/IHUUDCI1/F6O4BTJIHUUDCI1.jpg&filename=8.JPG)
![1.JPG](/proxy/?url=https://content.instructables.com/F4L/0CPM/IHUUDCFA/F4L0CPMIHUUDCFA.jpg&filename=1.JPG)
Make the stand for the broomstick.
I used an old Pallet block, and drill a hole in it.
Put the boards on the pole.....
3 at a time and 3 blocks as a spacer.
And your Christmas tree is ready...
For more details for this project.... watch the video
Hope you injoy this project.
You wanna see how I made the snowball led lights.
Watch the instuctions and video: