A 'PEN' Pen Holder

Here I present you 'a pen pen holder'. It's made up of used plastic pens.

Plastic Pens

Hacksaw Blade/Knife (if necessary)

Glue

I have three types of pens here.

I removed the refills and caps of the pens and took the middle portion.

In one type I have to cut the nib from the pen using a hacksaw blade (a knife can also be used as an alternative)

I paired all of them as you can see, and glued each pen, and let it dry. It will be easier to attach them further.

Again I paired the already paired ones.

Then I attached the 4 by 4 in a curved shape, so that we get a circle shape at last.

Now, step by step attach the other paired pens too, so that finally it became a circle and let them dry.

Note: I didn't add any base to it. If you are trying this you can add a cardboard piece or anything for the base.

A Tip: You can attach those pens on the base eg.cardboard using glue, and attach pens together with that.

Finally, we get a round-shaped holder (You can make any shape you like).

I wrote a note and inserted it in two of those colourless pens I have.

Then I have inserted the pen's bottom to the top of the penholder, which is also an optional one.

SO THERE IT IS ... A pen holder made up of pens.... A 'PEN' PENHOLDER!