A Diy: Recycled Beer Bottle TIKI Torch

In this Instructable I will show you how to build a quick and easy TIKI Torch.

You will need the following:

Some Electrical tape.

An Electrical conduit fitting 3/4" Diameter

A Tac Hammer

Scissors

Some recycled beer bottles from the recycling center (or you could use your own !)

Chicken Wire

Tiki Wicks

Tiki Fuel

A Funnel

And some Nails

First Unscrew the nut from the fitting. And then put one wrap of the tape around it and then cut it with the scissors.

Then pour the fuel to the taper.

Then tap in the fitting in the the bottle VERY CAREFULLY!

Then insert the wick so that it sticks of 1/2 inch out.

Now use the chicken wire and bend it around the bottle. But leave enough wire on the bottom make make a bottom on the wire. Then nail the nail into the part of the of the deck you want it on and hang the wire on it and you are DONE!