A DIY CAR HAT USING a PLASTIC WASTE ( HEADPHONE COVER PLASTIC ) WITH DESIGN DONE USING FUSION
by Adi Barath in Design > 3D Design
48 Views, 0 Favorites, 0 Comments
A DIY CAR HAT USING a PLASTIC WASTE ( HEADPHONE COVER PLASTIC ) WITH DESIGN DONE USING FUSION
Saw an empty waste of plastic, it was a headphone package cover and i had an idea of turning it into a car which is wearable. did it within an hour prototype + design in fusion. was in a urge as tthe time was running out!
Supplies
- A PLASTIC BASE
- SCISSORS
- GLUE
- STABLER
- A2 SHEET
- PENCIL / PEN
- A SOFT ROPE OR THREAD
Choose the Base ( for Us It Was Plastic Headphone Package Cover)
choose the plastic base.
Then Try to Figure What U Can Do With It
Made a Car by Covering It With Paper
Used Glue and Stabler Pins to Make It Fit
Use Pencil or Pen Wnd Draw the Needful Stuffs
Also Made the Design for It Using Fusion
Wear It Using a Small Thread or Rope ;)
