9V Mini Drill

This 9V powered drill is perfect for wood, PCB boards, bakelite, cardboards and many more.

Very simple to make, a perfect utility tool for DIY hobbyists.

At the end of the video you can see testing results!

Things you need:

- Hammer shank

- 9V Battery

- 9V Battery Connector

- Mini Switch

- Mini Motor

- Velcro Tape

- Srew Terminal

Saw hammer shank (something about 4 inches).

Then make a gap for the switch and attach switch with hot glue.

Now attach the motor, also with hot glue.

Make sure you use enough hot glue!

Attach the red cable from battery connetor to the switch.

Connect the black cable from battery connector to the motor.

Then use a little piece to connect the switch to the motor.

Now attach battery with velcro tape.

I used some electrical tape to make it stronger.

Take a screw terminal and remove the plastic from it.

Now use it to attach the drill to the motor.

9V Mini Drill is ready now!!

Finally, take it to the test!