8*8*8 Led Cube

this is a 8*8*8 led cube

Here is what you need to make a LED cube:

•  512x LEDs (plus some extra for making mistakes!)
•  64x resistors. (see separate step for ohm value)
•  1x or 2x large prototype PCBs. The type with copper "eyes", see image.
•  1x ATmega32 microcontroller (you can also use the pin-compatible ATmega16)
•  3x status LEDs. You choose color and size.
•  3x resistors for the status LEDs.
•  8x 74HC574 ICs
•  16x PN2222 transistors
•  16x 1k resistors
•  1x 74HC138 IC
•  1x Maxim MAX232 IC
•  1x 14.7456 MHz crustal
•  2x 22pF ceramic capacitors
•  16x 0.1uF ceramic capacitors
•  3x 1000uF electrolytic capacitor
•  3x 10uF electrolytic capacitor
•  1x 100uF electrolytic capacitors
•  8x 20 pin IC sockets
•  1x 40 pin IC socket
•  2x 16 pin IC socket
•  1x 2-pin screw terminal
•  1x 2wire cable with plugs
•  9x 8-pin terminal pins
•  1x 4-pin terminal pins, right angle
•  2x 16-pin ribbon cable connector
•  1x 10-pin ribbon cable connector
•  Ribbon cable
•  2x pushbuttons
•  2x ribbon cable plugs
•  9x 8-pin female header plugs
•  Serial cable and 4pin female pin header
•  Piece of wood for template and base
•  8x optional pull-up resistors for layers
•  5v power supply (see separate step for power supply)

first make the 4*4*4/5*5*5/6*6*6/3*3*3 led cubes for practice

then try 8*8*8 led cube

follow the circuit and make the led cube

upload this code to ardino and check the working