8-bit Super Mario Bros. Cheep Cheep

Hello everyone, today I’m sharing how to make 8-bit pixel Cheep Cheep from the NES version of Super Mario Bros. I followed the same technique I used to create 8-bit pixel Link from the original The Legend of Zelda game.

You can watch the video tutorial for Link below. Continue reading for Cheep Cheep's instructions.

To create 8-bit Cheep Cheep you will need to gather the following tools and supplies:

• jigsaw or bandsaw or scroll saw
• orbital sander
• router with 60 degree v-groove bit
• clamp edge guide
• yard stick
• 2' x 2' plywood - 1/2" thick
• Acrylic craft paints
• white spray primer
• clear coat
• sand paper

Use a ruler or yard stick to mark grid lines spaced 1.5″ apart onto the small sheet of plywood.

Install a v-groove router bit and route along the grid lines. Use a clamp edge guide to ensure straight lines.

Cut out the Cheep Cheep’s shape with a jigsaw (or use a bandsaw or scroll saw).

Sand between the grooves and sand the surface of Cheep Cheep. I used scrap piece of wood to support the sandpaper as I sanded between the grooves.

Spray Cheep Cheep with white spray primer.

Paint each pixel on Cheep Cheep. Painting between the grooves is a little tricky. Use painters tape to maintain clean lines. I was impatient and used paint brushes for painting miniatures to paint in the crevices.

If necessary, apply multiple layers of paint. Once the paint is dried, protect the finish with a clear coat.

I am really happy with how pixel Cheep Cheep turned out and look forward to working on my next pixel project!

Instagram: https://www.instagram.com/handmadewithashley/
YouTube: https://www.youtube.com/channel/UC6SOnloZ_nBrrVLJu...

Twitter: www.handmadewithashley.com

Website: www.handmadewithashley.com