7-Inch K'NEX Table
This is a 7 inch K'NEX table. It can hold things longer than 2 inches and wider than 1 1/2 inches.
Supplies
RODS: 8 blue (short), 4 white, 9 green or black
CONNECTORS: 4 black cap things, 8 gray, 2 white (blue work too), 6 yellow
Make the Tabletop
The image should help you make it. For the little black or green connectors, you can arrange them in a pattern like I did if you have both black and green types of the piece.
Make the Table Legs
Like in the last step, this image should help.
Attach the Parts
Attach the legs to the tabletop, one at each end, by sliding the grey connector pieces together.