4Pin RGB Controller

This Project is to Controll a 4Pin RGB Led Strip with a Wemos D1 Mini via Webinterface. If somebody needs help you can write an E-Mail to felix.nzgleisdorf@gmail.com

1* 15W 12V Power Suply

1* 4 Pin RGB LED Strip

1* Wemos D1 Mini

6* Mini Screws

1* 4 Pin Connector

1* 10 Diode

1* LS 7805

3* BSS 138

2* Capacitor

1* Bredboard

First you have to Solder all Parts togehter.

Now you can 3D Print the case and the cover of the case. And screw the Bredboard down

Program the Wemos D1 Mini.

Give the Network ID and the Password in the Bracket and define your Pins.

Type in the time when the Led goes on or off.

Find the IP Adress of your Wemos D1 Mini in the control pannel of your Router and type it in the Browser.

In this Bracket you can type the minutes until turn off after this time the led will turn off.

Try it out and have fun.