4 Players Competiton/Quiz Buzzer System Using CloudX Microcontroller

4 player quiz buzzer can be used at any competition, to know the team who has pressed the button first, and it will show it on the 7 segment.

• 1* CloudX microcontroller
• 1* CloudX Softcard
• 1* V3 USB data Cable
• 4* Push Button
• 1* 7 segment
• 8* 330ohm resisitor
• 4* 10k resistor
• 1* Active Buzzer
• Several jumper wires
• BreadBoard

you can get your component HERE

Button 1, 2, 3 and 4 are answer buttons. if button 1 is pressed first, the buzzer will beep, and the segment will display 1, same thing to other pins.

Let build the circuit using a CloudX microcontroller which read the input from push button and displays the corresponding number on a Segment.

Build the Circuit:

follow the circuit for your connection...

Copy this code to your CloudX IDE

#include <CloudX\M633.h>
#include <CloudX\Segment.h>

char i;
char NumberOfDigit = 1; // set number of 7 segment displays to be used

    // connect these CloudX pins to the Data Pins A,B,C,D,E,F,G and H pins of the Display
    char segmentDataPins[]= {1, 2, 3, 4, 5, 6, 7, 8};

    // connect these CloudX pins to the Common Anode or Cathode of each 7-segment display
    char segmentScanPins[]= 0; // to save pins we connect directly to ground(cathode)

setup(){
           //setup here
    Segment_setting(CCathode,NumberOfDigit,segmentScanPins,segmentDataPins);

    for(i=9; i<=12; i++){
        pinMode(i , INPUT);
    }

    pinMode(13 , OUTPUT);
    

loop(){
           //Program here
     if( !readPin(9) ){
         digitalWrite(13 , ON);
         Segment_write('1', 200);
         digitalWrite(13 , OFF);
     }
    if( !readPin(10) ){
         digitalWrite(13 , ON);
         Segment_write('2', 200);
         digitalWrite(13 , OFF);
    }
    if( !readPin(11) ){
         digitalWrite(13 , ON);
         Segment_write('3', 200);
         digitalWrite(13 , OFF);
      }

    if( !readPin(12) ){
         digitalWrite(13 , ON);
         Segment_write('4', 200);
         digitalWrite(13 , OFF);
      }

}

}